Sourdough Water Temperature
Calculator
Estimate the water temperature needed to approach your desired dough temperature after mixing.
- 01Choose a dough temperature
- 02Measure your ingredients
- 03Adjust the mixing water
Your mixing water temperature
EXAMPLE RESULTA worked example using the sample inputs.
Suggested water temperature
Calibrated input + a factor method water estimate.
Measure actual dough temperature after mixing.
Measure actual dough temperature after mixing. Friction varies by mixer and technique.
02Desired Dough Temperature Explained
- Choose a target dough temperature.
- Enter room, flour, starter and mixing-friction temperatures.
- Use the water estimate, then measure the actual mixed dough.
03How the Four-Factor Formula Works
With a 25°C target, 22°C room, 21°C flour, 23°C starter and a 6°C friction term, the four-factor calculation gives 28°C water: 4 × 25 − 22 − 21 − 23 − 6 = 28.
Mixing-water temperature is one way to influence the temperature of your dough after mixing. This tool balances a desired dough temperature against room, flour and starter temperatures plus an estimated mixing-friction term. Choose four factors when starter is included or three when it is absent. The result is an estimate to check with a thermometer, and the friction value needs calibration for your own method.
Calibrate Your Friction Factor
With starter: water = 4 × desired dough temperature − room − flour − starter − friction. Without starter: water = 3 × desired − room − flour − friction. Convert absolute °C to °F using × 9/5 + 32; convert a temperature difference using × 9/5 only.
The example friction term is not a measurement of your mixer. Keep records of actual mixed dough temperatures and adjust it for later batches. Water estimates outside 0–45°C are flagged for review rather than silently changed.
Continue with Sourdough Calculator.
04Frequently Asked Questions
Why does water temperature matter in sourdough?
Water temperature helps influence the dough temperature immediately after mixing.
Why do I enter starter temperature?
The starter contributes its own temperature during mixing, so a preferment-aware calculation includes it.
What is the friction factor?
It is an estimate of the heat added by your mixing method. Calibrate it using actual dough-temperature measurements.
Can I switch between Celsius and Fahrenheit?
Yes. Temperature readings and temperature differences must be converted using the correct formulas.
Will my dough reach the target exactly?
Not guaranteed. Mixing equipment, quantities and room conditions can change the actual result.