Sourdough Calculator

THE BAKING NOTEBOOK / A PRACTICAL TUTORIAL

How to Use an Aliquot Jar for Sourdough

An aliquot jar is a small straight-sided container holding a sample of your dough. By marking the starting height and watching the rise, you can estimate relative expansion. The sample and main dough may still behave differently.

How do I measure dough rise in a jar?

Take a representative sample, press it evenly into a straight-sided jar, mark the starting height and compare the new height. A rise from 10 mm to 15 mm equals 50%.

A small jar beside sourdough dough
THE BAKING NOTEBOOKAliquot jar guideIllustrative baking photography

01 / MARK & COMPARE

See how the sample rises

Mark the baseline and compare heights in a straight-sided jar.

Straight sides · Relative rise
WORKED EXAMPLERead first. Make it yours.
10 mmStarting mark
→
15 mmCurrent height
50%measured rise
Same straight-sided container

Schematic illustration. A rise reading describes expansion; it does not decide when to shape.

TRY YOUR OWN NUMBERS

Make this reference yours

mm
mm

Calculations stay in your browser.

FROM EMPTY JAR TO USEFUL READING

How to use an aliquot jar, step by step

01Prepare a clean jar

Use a transparent, straight-sided container with enough headroom. Avoid a strongly tapered shape.

02Mark the start

Add a representative dough sample and mark its baseline after settling without compressing it excessively.

03Measure, then compare

Measure height change and check the main dough as well. A jar reading is one clue, not a universal readiness rule.

CHECK THE NUMBERS

A worked example

A sample starting at 10 mm and rising to 15 mm has gained 5 mm. Divide 5 by 10 and multiply by 100: the measured rise is 50%. In centimeters, the same change is 1.0 cm to 1.5 cm.

THE METHOD

Rise % = (current height − starting height) ÷ starting height × 100%; applicable to a straight-sided sample jar.

Use the Sourdough Bulk Fermentation Calculator for your next batch.

THE QUESTIONS BAKERS ASK

A few things
you might be wondering.

Clear answers for this part of your bake.

01What size aliquot jar should I use?

Choose one with straight sides, clear markings and enough height for the sample to rise. A narrow, transparent jar makes a small height change easier to see. Leave headroom and use a cover that allows safe expansion.

02How do I mark 50% rise?

Multiply the starting height by 1.5. A 10 mm baseline reaches 15 mm at 50% rise. Use a ruler from the same baseline each time. Measuring in centimeters gives the same percentage.

03Why does the jar rise differently from the dough?

Temperature, sample handling and container geometry can make the sample behave differently. Keep the jar near the dough and avoid warming or cooling only the sample. Look for differences before trusting the reading.

04Can I use a tapered jar?

A tapered jar makes height an unreliable proxy for proportional volume change. Straight sides keep the cross-sectional area consistent, allowing height change to represent relative volume change.

05Does 50% rise mean it is ready?

Not necessarily. Compare dough temperature, feel and the recipe’s process. Your next steps, including a cold proof, change how much fermentation is desirable before shaping.