Does starter count toward sourdough hydration?
Yes. Include the flour and water inside the starter when calculating total dough hydration.
A little understanding. A better bake.
Find answers for all 18 sourdough calculators, charts and practical guides. Explore hydration, starter feeding, discard substitutions, fermentation, dough temperature and pizza dough, with worked examples and a direct link to every page.
Your baking reference
Read an explanation.
Try it with your own numbers.
Hydration & Recipe Math
Sourdough hydration is the weight of all water divided by all flour, expressed as a percentage. Count the flour and water inside your starter as well as the ingredients added to the bowl. A 100% hydration starter contains equal weights of flour and water. This calculator separates those contributions so you can check an existing recipe or find the fresh water needed for a chosen target.
Check a recipe or work backward from a water target with the Sourdough Hydration Calculator. Include your starter’s weight and hydration so its flour and water are counted once.
Yes. Include the flour and water inside the starter when calculating total dough hydration.
Split the starter weight equally into flour and water, then add those amounts to your fresh ingredients.
It means the total water weighs 75% of the total flour, including flour and water contained in starter.
Multiply total flour by your target hydration, then subtract water already supplied by the starter.
Flour type, mixing, fermentation and handling can affect dough feel even when hydration is the same.
Hydration & Recipe Math
A sourdough hydration chart helps you compare water levels before you mix. Higher hydration often feels looser, but flour absorption, mixing and fermentation can change what you feel. Use this starter-aware example to see how much fresh water each target requires.
Read the Sourdough Hydration Chart for the reference, worked example and practical steps.
Yes. Count the flour and water already in your starter before dividing total water by total flour. For example, 100 g of 100%-hydration starter adds 50 g flour and 50 g water. Leaving those out changes the result.
It can work, but handling depends on flour and technique. Some beginners prefer a slightly firmer dough. Try a small batch first and keep other variables similar. Increase water gradually so you can recognize the effect.
You need 400 g total water. Subtract the water contributed by your starter to find the fresh water to add. If your starter contributes 50 g water, add 350 g fresh water, giving 400 g total water for 500 g total flour.
Flour type, gluten development, temperature and fermentation can all affect stickiness. Hydration alone is not the whole story. Record the flour, dough temperature and handling alongside the percentage so you can compare your next bake.
Yes. The default example uses a 100%-hydration starter, but you can enter your actual starter hydration to update the chart. For an existing recipe with known flour and water weights, use the Hydration Calculator to check its total hydration.
Hydration & Recipe Math
Baker’s percentages compare ingredient weights with a flour baseline of 100%. This tool uses all flour, including flour in the starter, as that baseline. It analyzes a recipe you already have instead of generating a new one. Water, starter and salt are shown against total flour, with starter contributions separated so that you can see how each number was calculated.
Enter an existing recipe in the Baker’s Percentage Calculator to compare hydration, starter and salt against total flour. It explains your ingredient weights rather than generating a new recipe.
All flour in the calculation is the reference amount, so every other ingredient is expressed relative to it.
For true dough hydration and total-flour ratios, yes. Show the starter contribution separately to avoid confusion.
Because the flour baseline is 100% and every other ingredient is measured against that baseline.
No. Hydration is only the water-to-flour ratio, while baker’s percentages describe each ingredient relative to flour.
Yes. Enter the ingredient weights you plan to mix and review the resulting ratios.
Hydration & Recipe Math
Starter percentage and prefermented flour percentage are different numbers. The first compares the whole starter mass with flour; the second counts only the flour already fermented inside that starter. Use both to describe your recipe accurately.
Read the Prefermented Flour Percentage Calculator for the reference, worked example and practical steps.
No. At 100% starter hydration, only half the starter mass is flour. The two ratios use different numerators. The whole starter contains both flour and water; prefermented flour counts only its flour. Always check which denominator a recipe uses.
Divide starter weight by 1 plus hydration as a decimal, then divide starter flour by all flour in the dough. At 100% hydration, divide starter weight by two. At another hydration, use starter mass ÷ (1 + hydration ÷ 100).
Yes. Use fresh flour plus flour inside the starter for the total-flour denominator. Some recipe authors compare starter with fresh flour only. This page consistently compares both figures with total flour.
A higher prefermented flour percentage changes how much already-fermented flour enters the dough, but it cannot predict a finish time by itself. Starter maturity, dough temperature, flour and your fermentation process also affect the pace.
Enter its actual hydration; a stiff starter carries more flour per gram than a liquid starter. Use the hydration field to split it into flour and water before calculating either percentage.
Starter & Feeding
A starter feeding ratio describes retained starter, fresh flour and fresh water by weight, in that order. At 1:2:2, each gram of starter receives two grams of flour and two grams of water. Use the starter-on-hand mode to feed a known seed amount, or the target-weight mode to build a specific total. Neither mode predicts when the starter will peak.
Use the Sourdough Starter Calculator when you know how much starter you are keeping or how much finished starter you need. The ratio always follows starter : flour : water by weight.
Keep one part existing starter and add two parts flour and two parts water by weight.
Add 40 g flour and 40 g water; you will have 100 g starter after feeding.
Use 40 g existing starter, 80 g flour and 80 g water.
Not necessarily. Feeding ratio, flour, temperature and starter activity all influence when it peaks.
No. The first describes a feeding recipe; hydration compares total water with total flour in the starter.
Starter & Feeding
To change starter hydration without discarding, first separate its weight into flour and water. Add flour to make it stiffer or water to make it more liquid. Keep the other ingredient unchanged and calculate the addition needed for your new water-to-flour ratio. This is an add-only mass conversion, so the final starter is heavier; it is not a feeding schedule or a readiness prediction.
The Sourdough Starter Hydration Converter shows the flour or water to add to an existing starter. Choose this for a change in consistency; use the feeding calculator for a repeat feeding.
For 100 g starter at 100% hydration, add about 33.3 g flour to reach 60% hydration without discarding.
Yes. Add water to increase hydration while keeping the original flour amount unchanged.
No. This calculator is for add-only conversion, so the final starter weighs more than the original.
No. Hydration is water divided by flour; feeding ratio describes how much old starter, fresh flour and fresh water are combined.
No. Allow for fermentation and check its activity before using it as leavening.
Starter & Feeding
Feeding ratios describe how much old starter, fresh flour and fresh water you combine by weight. This chart turns 1:1:1, 1:2:2, 1:3:3 and 1:5:5 into easy kitchen numbers, without promising an exact time to peak.
Read the Sourdough Starter Feeding Ratio Chart for the reference, worked example and practical steps.
One part retained starter, two parts new flour and two parts new water, all measured by weight. With 20 g retained starter, that means adding 40 g flour and 40 g water for a 100 g refresh.
A larger feed often changes the time to peak, but temperature, flour and starter strength can reverse a simple expectation. Compare feeds with the same starter, flour and temperature before using a ratio to plan your routine.
Not automatically: the old starter also contains flour and water, so its starting hydration matters. Equal new flour and water preserve a 100% starter at 100%. A stiff seed pulls the final hydration below that value.
Add 100 g flour and 100 g water, for a total of 220 g. The 20 g seed is included in the final weight. Keep enough headroom for expansion.
There is no universal overnight ratio. Test your flour and kitchen temperature, then note when your starter actually peaks. Start with an observed peak from your own kitchen and adjust one variable at a time.
Starter & Feeding
A stiff starter uses less water relative to flour than a liquid starter. But a 1:2:1 feeding ratio does not always produce the same final hydration: the seed starter also carries flour and water. Calculate the full balance before feeding.
Read the Stiff Sourdough Starter Feeding Ratios for the reference, worked example and practical steps.
Many stiff starters use less water than flour by weight. Exact targets vary by method; 50%–65% is one common planning range. The seed contributes flour and water too, so the ratio of new flour to new water is not always the final hydration.
No. The old starter hydration changes the result. With 20 g of 100% seed plus 40 g flour and 20 g water, it happens to be 60%. A 100%-hydration seed brings more water per gram than a stiff seed. Include that contribution in the next feed.
You can feed a chosen portion without discarding the rest. Retaining a smaller seed keeps each refresh manageable and leaves room for new flour and water. This page plans one feed; it does not tell you that you must discard.
Feeding adds fresh flour and water as part of ongoing maintenance. Conversion changes the composition of an existing starter. This planner sets the final hydration of a complete feed; use the Hydration Converter for a one-time adjustment.
Visible height is not directly comparable because dough stiffness and container shape change expansion. Starter strength, flour and temperature still govern the refresh. Use your observations to establish a repeatable routine.
Starter & Feeding
Sourdough discard contributes flour and water to a recipe. At 100% hydration, half of its weight is flour and half is water. To preserve an existing recipe’s totals, subtract both contributions from the ingredients you would otherwise add. If the discard supplies more flour or water than the recipe contains, that amount cannot be substituted without changing the recipe. Its leavening strength is a separate question.
Account for an existing recipe’s flour and water with the Sourdough Discard Calculator. This substitution keeps the ingredient totals in view; it does not establish whether the discard can leaven your dough.
Approximately 50 g flour and 50 g water.
It changes the flour and liquid totals. Subtract what the discard contributes if you want to preserve the original amounts.
The calculator flags the substitution as incompatible instead of showing a negative water amount.
Not reliably. Discard can provide flour, water and flavor but may not have the leavening activity a bread recipe needs.
Yes for accuracy. A stiffer discard contains more flour per gram than a liquid one.
Starter & Feeding
Discard is not a free extra ingredient in a recipe: it already contains flour and water. Use this chart to subtract those amounts from a compatible recipe before mixing, while remembering that discard acidity and leavening strength can still affect the result.
Read the Sourdough Discard Substitution Chart for the reference, worked example and practical steps.
At 100% hydration, 100 g discard contains 50 g flour and 50 g water. To preserve a recipe’s totals, remove those amounts from the fresh ingredients. Discard at another hydration has a different split.
Adding discard on top of a recipe changes its flour and water totals, hydration and possibly texture. This chart instead helps preserve those totals by showing what to subtract. It does not guarantee the same acidity or leavening.
Discard may be less active than freshly fed starter, so an equal weight is not a reliable replacement for active starter. Flour-and-water substitution and leavening are separate questions. Follow a tested recipe’s instructions for yeast or other leavening.
Yes. The default is 100% hydration, but you can enter the actual hydration to update the chart. Stiff discard contains more flour and less water per gram. Use the Discard Calculator for a detailed recipe adjustment.
If the discard provides more water than the recipe allows, do not show a negative amount; choose less discard or a different recipe. Milk, eggs and butter contain solids or fat as well as water. A simple water subtraction does not preserve their role in the recipe.
Fermentation & Temperature
Bulk fermentation is the first rise after mixing and before dividing or shaping. Its duration varies with your dough and conditions, so a clock alone cannot decide when it is complete. This planner scales a time you observed in a previous bake to a different dough temperature. The range is experimental: use it to schedule observations, then assess rise, bubbles, structure and handling.
Bring a time and dough temperature from your own previous bake to the Sourdough Bulk Fermentation Calculator. If you do not have that baseline, use its observation timer and watch the dough instead of treating an estimate as a finish signal.
It varies with dough temperature, starter strength, flour and recipe. Use your own past bake as the baseline and observe the dough.
Warmer conditions usually increase activity within a practical range, but the relationship is not precise for every dough.
No. It produces a rough planning estimate, not a guaranteed readiness time.
Look for visible rise, bubbles, surface changes and how the dough responds to handling.
Use a marked container or an aliquot sample and record the change from the starting level.
Fermentation & Temperature
An aliquot jar tracks the change in a small sample of dough. In a straight-sided container, compare its current height with its starting height to estimate percentage rise. The target mark is the starting height multiplied by one plus your chosen rise fraction. This measurement describes expansion; it cannot decide whether every dough is ready to shape or replace observations of the main batch.
Use the Sourdough Aliquot Jar Calculator to compare starting and current heights in the same straight-sided container. The result describes rise toward your chosen target, not a universal shaping time.
Subtract the starting height from the current height, divide by the starting height, and multiply by 100.
Multiply the starting height by 1.5. A 10 mm starting level reaches 15 mm at 50% rise.
Not always. The suitable rise target depends on the recipe and temperature; use the sample as one observation.
A straight-sided jar gives a more meaningful height-to-volume comparison than a tapered one.
The calculator can show a negative percentage; check the measurement and sample conditions.
Fermentation & Temperature
Dough temperature is more useful than a clock alone when watching bulk fermentation. This chart helps you record temperature, rise and visual cues together. It does not claim that every dough is ready at the same time or percentage.
Read the Sourdough Bulk Fermentation Temperature Chart for the reference, worked example and practical steps.
There is no universal number. Recipe, inoculation, flour and starter strength all matter. Keep the recipe and process in view, including what happens after shaping. A sample log is not an endpoint recommendation.
Not always. Some methods call for less rise because the dough continues fermenting during shaping or a cold proof. Compare the recipe’s intended process with dough temperature, expansion, bubbles and strength instead of treating doubling as a universal rule.
A time-only chart can help organize a bake, but it cannot confirm readiness. Record actual dough temperature, rise and texture at each check. Use comparable observations from your own previous batches to refine your process.
Look for expansion, bubbles and changes in surface shape while keeping a consistent observation method. Use the same reference point or container markings each time so the observations can be compared.
It provides a structured observation template, not a guaranteed fermentation endpoint. The personal log stays in the current tab and disappears on reload. It does not calculate a finish time.
Fermentation & Temperature
An aliquot jar is a small straight-sided container holding a sample of your dough. By marking the starting height and watching the rise, you can estimate relative expansion. The sample and main dough may still behave differently.
Read the How to Use an Aliquot Jar for Sourdough for the reference, worked example and practical steps.
Choose one with straight sides, clear markings and enough height for the sample to rise. A narrow, transparent jar makes a small height change easier to see. Leave headroom and use a cover that allows safe expansion.
Multiply the starting height by 1.5. A 10 mm baseline reaches 15 mm at 50% rise. Use a ruler from the same baseline each time. Measuring in centimeters gives the same percentage.
Temperature, sample handling and container geometry can make the sample behave differently. Keep the jar near the dough and avoid warming or cooling only the sample. Look for differences before trusting the reading.
A tapered jar makes height an unreliable proxy for proportional volume change. Straight sides keep the cross-sectional area consistent, allowing height change to represent relative volume change.
Not necessarily. Compare dough temperature, feel and the recipe’s process. Your next steps, including a cold proof, change how much fermentation is desirable before shaping.
Fermentation & Temperature
Mixing-water temperature is one way to influence the temperature of your dough after mixing. This tool balances a desired dough temperature against room, flour and starter temperatures plus an estimated mixing-friction term. Choose four factors when starter is included or three when it is absent. The result is an estimate to check with a thermometer, and the friction value needs calibration for your own method.
Estimate your mixing water with the Sourdough Water Temperature Calculator, then measure the actual dough after mixing. Keep notes so you can adjust the friction factor for your own mixing method.
Water temperature helps influence the dough temperature immediately after mixing.
The starter contributes its own temperature during mixing, so a preferment-aware calculation includes it.
It is an estimate of the heat added by your mixing method. Calibrate it using actual dough-temperature measurements.
Yes. Temperature readings and temperature differences must be converted using the correct formulas.
Not guaranteed. Mixing equipment, quantities and room conditions can change the actual result.
Fermentation & Temperature
A friction factor is a practical calibration term for heat added during mixing. It is not the same for every mixer or batch. Use one real measured mix to estimate a value, then check it again when your technique changes.
Read the Dough Friction Factor Calculator for the reference, worked example and practical steps.
It is a calibration adjustment representing heat gained during mixing in a chosen formula model. It is inferred from the completed mix using a three- or four-factor temperature formula. It is not a universal mixer setting.
No. Batch size, mixing speed, duration, dough consistency and equipment all change the inferred factor. Keep those conditions similar when reusing a value, and recalibrate when your process changes.
No reliable calibration is possible without the actual finished-dough temperature. The default 25°C is a worked example, not a measurement of your dough. Measure immediately after mixing and enter that reading before using the result for another batch.
It can occur mathematically with noisy readings or cooling conditions. Flag it and review measurements rather than forcing zero. Check when and where each temperature was measured, and whether your process lost heat. Do not silently replace the negative result with zero.
Enter it in the main Water Temperature Calculator for a comparable mixing setup and the same three- or four-factor model. A factor is a temperature difference: 6°C equals 10.8°F. Do not add 32 when converting it.
Pizza Dough
The dough you need is the number of pizzas multiplied by the raw weight of each dough ball. Set that weight for your own pizza size and style, then choose hydration, starter, salt and oil. The calculator accounts for the flour and water in your starter and returns a complete weighing list. Rounded ingredient weights add up to the exact whole-gram batch total.
Choose dough-ball count, raw ball weight and ingredient ratios in the Sourdough Pizza Dough Calculator. Its ingredient list accounts for the flour and water supplied by starter; dough-ball weight means unbaked dough.
Choose a dough-ball weight based on pizza size and style; the calculator multiplies it by the number of pizzas.
Yes. The recipe includes starter as one of the weighed ingredients and avoids counting its flour and water twice.
Yes. Set oil to 0% and the calculator recalculates the remaining ingredients.
Pizza uses its own ball-size workflow and may include oil or different salt and hydration settings.
No. Use the fermentation planner separately and judge the dough itself before baking.
Pizza Dough
Dough ball weight depends on the finished pizza area and the crust thickness you prefer. A larger diameter needs more dough because area grows with the square of the radius. This chart uses a stated sample loading so you can adjust it to your style.
Read the Pizza Dough Ball Weight Chart for the reference, worked example and practical steps.
At the sample loading of 2.2 g/in², about 249 g. Thinner or thicker crusts need different weights. The result is raw dough weight before baking. Change the loading if you prefer a thinner or fuller crust.
A pizza’s area grows with the square of its diameter. At the same dough loading, a 16-inch pizza uses about 1.78 times the dough of a 12-inch pizza. The chart shows both values using the same assumption.
For a round pan you can use the diameter, but choose a dough loading that suits the depth you want. This chart does not model rectangular pans. Use the pan’s actual area and a tested loading for those.
The target ball weight includes all ingredients, including starter. After you choose a weight here, the Sourdough Pizza Dough Calculator splits the full batch into flour, water, starter and salt while accounting for the starter’s flour and water.
Use that measured result to calibrate your preferred loading factor instead of relying on a general chart. Once you choose a ball weight, open the Pizza Dough Calculator to plan the full ingredient list.