Sourdough Calculator
A SMALL SAMPLE. A CLEARER PICTURE.

Sourdough Aliquot Jar Calculator

Enter your sample’s starting and current heights to measure its percentage rise and calculate your target mark.

Rise percentageStraight-sided jar
A narrow aliquot jar of risen dough with an elastic band marking the starting level
THE ALIQUOT METHODMake rise visible
Measure in a straight-sided jar
  1. 01Mark the starting height
  2. 02Measure the current height
  3. 03Compare with your target

Measure dough rise

STEP 01

Use a small, straight-sided sample to track expansion.

01Read your jar
mm
mm
02Set your reference
%

Free to use · No account required

Adjust the target for your recipe and conditions; do not treat it as a universal finish line.

Your dough rise reading

EXAMPLE RESULT

A worked example using the sample inputs.

Rise so far40%
Target mark15 mm

Aliquot jar · height guide

15 mm target · 50% rise

14 mm current · 40% rise

10 mm starting height

Rise so far40%
Target mark15 mm
Distance remaining1 mm
Progress to target80%

Use a straight-sided jar. A rise target is an observation, not a universal readiness rule.

02How to Measure Aliquot Jar Rise

  1. Mark the initial height in a straight-sided jar.
  2. Measure the current sample height and target rise.
  3. Read rise percentage, target mark and distance left.

03What a 50% Rise Looks Like

A sample rising from 10 mm to 14 mm has risen 40%. A 50% target sits at 15 mm, leaving 1 mm to go. Progress toward that chosen rise target is 80%.

An aliquot jar tracks the change in a small sample of dough. In a straight-sided container, compare its current height with its starting height to estimate percentage rise. The target mark is the starting height multiplied by one plus your chosen rise fraction. This measurement describes expansion; it cannot decide whether every dough is ready to shape or replace observations of the main batch.

Why the Sample May Differ from the Main Dough

Rise % = (current height − starting height) ÷ starting height × 100. Target height = starting height × (1 + target rise ÷ 100). Progress % = measured rise ÷ target rise × 100.

Use a container with a nearly constant cross-section; height ratios in a tapered jar do not directly measure volume ratios. Temperature, drying and handling can make the sample differ from the main dough. A shrinking sample can correctly produce a negative rise.

04Frequently Asked Questions

How do I calculate sourdough rise percentage?

Subtract the starting height from the current height, divide by the starting height, and multiply by 100.

What height marks a 50% rise?

Multiply the starting height by 1.5. A 10 mm starting level reaches 15 mm at 50% rise.

Does a 50% rise mean bulk fermentation is done?

Not always. The suitable rise target depends on the recipe and temperature; use the sample as one observation.

Can I use any jar shape?

A straight-sided jar gives a more meaningful height-to-volume comparison than a tapered one.

What if my sample shrinks?

The calculator can show a negative percentage; check the measurement and sample conditions.